Regarding DNS servers, what router do you have? Some routers have simple enough DNS capabilities — I have a MikroTik, and have it set up with DNS entries for internal services (including wildcard). Publicly accessible services just use my registrar’s DNS (namecheap — no complaints).

San Francisco is north of 40¢/kWh.

Scaramouche, by Rafael Sabatini

But will he do the Fandango?

On low end CPUs you can max out the CPU before maxing out network—if you want to get fancy, you can use rsync over an unencrypted remote shell like rsh, but I would only do this if the computers were directly connected to each other by one Ethernet cable.

If you’re running it via docker compose it’s trivial to upgrade, and there are no breaking changes. Pull, down, up, you’re done.

When I criticize my baby, he looks me in the eyes and asserts dominance with a “what you gonna do about it?” shit grin.

Comparing him to Stephen Miller is just offensive.

https://en.m.wikipedia.org/wiki/Hypercorrection

My favorite is habanero — there’s no ñ, just n, but some will make a show of pronouncing it with the incorrect ñ sound.

Frigate is pretty good, too. I’ve only been running it for a few months but I’m very happy with it.

Though, technically that leaves you more at risk of ransomeware or something that overwrites your data.

I rsync as well, but use snapshotting on the remote drives. So, a bad rsync would suck but shouldn’t really result in data loss. Ransomware on my local+remote server would of course be very bad…

I do something similar — I have a raspberry pi and a HD, with daily rsync and snapshots (monthly retained indefinitely, weekly retained for a month, daily retained for a week). It’s at family’s house, connected to my home via WireGuard via a VPS. Tailscale (or anything really) would also work here.

It’s a great setup! Just have some watchdog reboot if it can’t talk to home (a simple cronjob with ping -c1 home.lan || reboot or similar).

Even our “slow” 35Mbps upload speed is way more than enough for incremental rsyncs of my Immich library. The initial sync was done in person, though.

I got one from goHardDrive on eBay (link). It was cheap enough, looks flawless, and knock on wood has been working fine.

Googling around, the brand gets…mixed reviews. My use case is such that of this drive fails it’s not a big deal.

I’ve honestly never understood people who feel the need to “replace” Spotify. … Spotify has never made sense for my use-case.

I don’t know how to say this, but…you have extremely uncommon use-cases:

…during those times, my phone is either fully turned off (so I’ll use an MP3 player), or it’s in Airplane Mode.

Many people listen to music on stereos and don’t necessarily want a device plugged in, so

I just download the music I like to my device and listen to it via VLC.

either doesn’t work or is substantially less convenient than e.g. casting from a phone.

Not hating on your setup at all, but it’s very niche, in my experience.

https://en.m.wikipedia.org/wiki/Blackbird_(wind-powered_vehicle)

Can go directly upwind (no tacking required). Can also be applied to boats.

I’m drunk, and it’s all Mexico’s fault!

Sorry you’re getting down voted — lots of replies from folks unclear on what the diffraction limit means, atomic resonances, etc.: https://www.newscientist.com/article/2161094-a-single-atom-is-visible-to-the-naked-eye-in-this-stunning-photo/

Parent didn’t say resolve, they said see — you can’t resolve stars but you can most certainly see them.

Light up a single atom enough and you can see it (unclear if this works with a dark adjusted naked eye or if a long exposure is required): https://www.newscientist.com/article/2161094-a-single-atom-is-visible-to-the-naked-eye-in-this-stunning-photo/

No, they’re too small to resolve. You can see small things if they’re bright enough: https://www.newscientist.com/article/2161094-a-single-atom-is-visible-to-the-naked-eye-in-this-stunning-photo/

A single atom of gold is far too small for any photon in the visible spectrum to interact with.

That’s incorrect — single atoms can, and do, interact with optical photons.

https://arxiv.org/abs/2410.19671 https://www.nature.com/articles/ncomms13716

And the entire field of super resolution microscopy relies on small things (e.g., molecules) interacting with light.

The energy from nuclear reactions can be astonishingly large (compared to, say, chemical reactions).

But atoms are really, really, really small.

ZigBee router thing:

I’ve been happy with the SMLIGHT SLZB-06M. You can easily flash firmware, and it has PoE which was important for me. I believe it also supports Thread, but I haven’t tried this yet (and I’m not sure if it supports it at the same time as Zigbee).

Zigbee smart plugs from Third Reality have been pretty solid in my experience, and they report power usage.

For circuit breaker level monitoring, I have an Emporia Vue2. I have it running esphome, completely local — unfortunately this requires some simple soldering and flashing, so it’s not turnkey. But it’s been rock solid ever since flashing it. (Process is well documented online.)

I’ve had decent luck with cheap wifi Matter bulbs, but provisioning them is finicky, and sometimes they just crap out and need to be power cycled; Zigbee bulbs (e.g., Ikea) have generally been reliable, though sometimes I’ve had difficulty pairing them initially. After power cycling a Matter WiFi bulb, it takes a while for it to respond to Home Assistant; Zigbee bulbs generally respond as soon as you power them on.

I have a wired smart light switch from TP-Link/Kasa (KS205), and it’s been completely hassle free (and totally local — Matter over wifi). The Kasa smart switch dongles I have work flawlessly but need proprietary pairing, and I’m afraid to update firmware in case they lose local support.

Good luck! Fun adventure :)